企业资料通过认证
本公司为满足矿井、油田、钢铁、铁路、电业、公安等企业对移动防爆照明灯具的需要，研制开发的新型免维护固态防爆头灯，经国家权威机构防爆认证，可在各种易燃易爆场所、水下及其他工作现场安全工作。
▇性能特点
防爆功能 本产品已通过国家权威机构防爆和煤安认证，完全按照国家防爆标准生产，具有优良的防爆、防静电效果，可在各种易燃易爆场所安全工作(包括含有氢、乙炔、甲烷及其他混合气体的环境)。
采用高效率的半导体发光技术；
质量稳定 高能无记忆电池容量高，充放电性能稳定，自放电率低。前壳采用高强度防弹塑料，后壳采用超不碎工程塑料，使产品有高耐冲击性。光学部分采用长寿命1W发光二极管，无需更换；控制部分采用8位微处理器，时刻监视电池和发光二极管的工作；
防水性能 精密的结构能确保该灯可经受强力碰撞和冲击，外壳防护等级为IP66；
功能独特 采用两套光源，分主灯和备用灯，由一个灯键更换。另一个时钟按键工作四位数码管循环显示灯号、时间和电池当前容量。外形美观，体积小，重量轻，产品一体化，无束缚，减轻工人的负载，提高工作效率。
▇技术参数
1 Features:
1.1 Safety: All in one case with PC plastic material , make very good feature of explosion-proof, protection in electrical short-circuit, automatic power-off on the socket , 100,000 hours LED’s Life
1.2 Reliability: The high strength case , optimized structure design and MCU control make the product more reliable
1.3 Portability: Just a head lamp , Small in size , light in weight , simple charging , easy usage
1.4 Efficiency: more than 15hours working time , more than 3000lux at the starting time, and more than 2000 lux after12 hours continous lighting, battery usage life 1000 cycles, display cap lamp number , time , battery capacity by 4 LED digit , 6pcs 5mm backup LED’s
1.5 Environmental: Li-ion battery is free maintenance, and the material of li-ion is environmental , use 1Watt high power LED to save power
1.6 Economy: three times longer than lead and acid cap lamp and saving in maintenance makes the product more compatible in price
1.7 Water resistant : 2 meters
2 Major technical specifications:
|
Features |
KL4.5LM Specifications |
|
Rated capability |
4.5Ah(li-ion battery) |
|
Rated voltage |
3.7V |
|
Continuous discharging time |
>15h |
|
Main light LED Working voltage |
3.2V |
|
Main light LED Working current |
0.35A |
|
Main light Power |
1W |
|
Main light Luminous flux |
>100Lm |
|
lamp lighting degree (distance 1 meter) |
>6000Lux (at the starting time) >5000Lux (after 12 hours working time) |
|
Main light Usage life hour |
>30000h |
|
Weight |
<210g |
|
Accessory light Usage life hour |
100000h |
|
Short circuit protect time |
<15ms |
|
Usage duration of battery (recharges) |
1000 recharges (in reasonable working condition) |
|
Charging time |
≤ 8hours |
|
Charing voltage and current |
4.9V@1A |
3 Operation procedure
3.1 Main LED and backup LED ON/OFF : Press lamp button( a lamp mark on the button) one time , Main LED on , Press Lamp button again , Main LED off , backup LED on , Press lamp button again , back LED off . press lamp button for next cycle.
3.2 Display cap lamp number, time ,capacity : Press clock button( a clock mark on the button) one time, display lamp number , Press clock button again , display current time, Press clock button again , display current battery capacity (four squares is full , three squares means 3/4 capacity , two means 1/2 capacity, one means 1/4 capacity, one square blink per 20 sec. Means have to be charged again and the battery capacity only can light for about one hour) , press clock button again , all LED digit off , if there are no button be pressed , after 20 sec. The LED digit will automatically turn off.
3.3 Clock set : Press clock button and hold about 3 sec.s , the hour will blink , release clock button , press lamp button to set the hour , press clock button again , minute high bit will blink , press lamp button to set the minute high bit , press clock button again , minute low bit will blink , press lamp button to set the minute low bit, press clock button again to /confirm/i and finish clock setting.
3.4 Cap lamp number set : For management of enterprises only ，ask agent for help.
4 Charging :
4.1 Charger input: AC100-240V 50-60Hz , 0.3A
4.2 Charger output : DC 4.9V@1A
4.3 Manufacturer provide charger to user , please use it only
4.4 When long-term storage is needed , charging should be done within two months.
